Weidmuller PrintJet ADVANCED User Manual page 149

Code Event
The ink collecting
40159
tray was not
inserted correctly.
40904 The temperature
is too high.
40905 The temperature
is too low.
40011 The ink collector
unit is full.
10044 The temperature
is too low.
10045 The temperature
is too high.
Internal error
1449820000/1.4/04.17
Measure
Insert the ink If the message is
collecting tray displayed again, please
correctly and contact your Weidmüller
make sure that it representative.
is fully engaged.
Restart the printer
if necessary.
Wait a while until If the message is
the printer has displayed again, please
acclimatized. contact your Weidmüller
Restart the representative.
printer.
Wait a while until If the message is
the printer has displayed again, please
acclimatized. contact your Weidmüller
Restart the representative.
printer.
Replace the ink If the ink collector unit is
collector unit. full, you can no longer
The order number continue to print.
is 1338710000.
Wait a while until If the message is
the printer has displayed again, please
acclimatized. contact your Weidmüller
Restart the representative.
printer.
Wait a while until If the message is
the printer has displayed again, please
acclimatized. contact your Weidmüller
Restart the representative.
printer.
Restart the If the message is
printer. displayed again, please
contact your Weidmüller
representative.
Troubleshooting
Information
Do not open the
wastepad. The complete
tray must be replaced.
Dispose of the wastepad
through an authorized
dealer or at a suitable
hazardous materials
disposal center.
Check local regulations
before attempting to
dispose of the wastepad
yourself.
149