Setting Up And Adjusting A Multicard For The Printer - Weidmuller PrintJet ADVANCED User Manual

Setup
If you also register the software via the internet, you will receive information about software updates and a
description of new functions.
5 To do this, click the [Register] button and follow the instructions that are shown.
6 If you do not want registration, click the [Next] button.
M-Print® PRO – finishing the installation process
Figure 83
7 To complete activation, press the [Finish] button.
4.16

Setting up and adjusting a MultiCard for the printer

To set the correct print position for a MultiCard and to compensate for physical changes to it, you must make
some settings via the M-Print® PRO software.
These tasks are described in detail in chapter "5 Operation", in section "5.2 Software settings".
1449820000/1.4/04.17 73