Weidmuller PrintJet ADVANCED User Manual page 29

NOTE
• The printer must be placed on a flat,
stable surface. The printer will not
operate properly if it is tilted or at an
angle.
• Avoid locations that are subject to
strong fluctuations in temperature
and humidity.
Also see section "9.1
Technical data".
• Do not expose the printer to direct
sunlight, strong light or excessive
heat.
• Avoid locations that are subject to
impact shocks or vibrations.
• Do not use a table joined to other
tables in order to avoid the
transmission of vibration.
• Avoid installation sites that are
subject to a large amount of dust.
1449820000/1.4/04.17
1 Pay attention to the information given above.
2 Place the printer on a surface that extends
beyond the base area of the printer on all sides.
3 Leave enough space in front of the output rail to
allow the printer to output
MultiCards/MetalliCards without hindrance.
4 Install the printer in such a way that it is
sufficiently ventilated on all sides.
5 Install the printer near a power socket so that the
plug can be readily removed in the event of a
fault.
Setup
29