Hazards Due To Hot Surfaces; Hazards Due To Incorrect Spare Parts; Safety Devices And Guards; Obligations Of The Plant Operator - Weidmuller PrintJet ADVANCED User Manual

2.6.2

Hazards due to hot surfaces

CAUTION
Burn hazard due to hot surfaces
Contact with hot components can cause
burns.
Make sure all components have cooled
down to the ambient temperature prior
to carrying out any work.
2.6.3 Hazards due to incorrect spare
parts
NOTE
Incorrect or faulty spare parts may
cause damage, malfunctions, or total
failure, and may also give rise to safety
hazards.
Use original spare parts only.
Purchase spare parts from Weidmüller. The
necessary details about spare parts are given in
section "9.2 Ordering data".
2.7

Safety devices and guards

• Only operate the printer with the printer enclosure
in place and the ink tank lid closed.
• Do not remove the printer enclosure. Opening the
enclosure will cause a loss of all warranty rights.
1449820000/1.4/04.17
2.8 Obligations of the plant
operator
The device is used in an office environment in the
commercial sector. The device operator is therefore
subject to the legal requirements concerning
occupational health and safety.
In addition to the safety information in this user
manual, it is necessary to comply with the safety,
accident prevention, and environmental protection
regulations in force in the country of use. The
following applies in particular:
• The operator must clearly define and arrange the
responsibilities for installation, commissioning,
operation, maintenance, and cleaning.
• The operator must ensure that all personnel
working on or with the printer have read and
understood this user manual.
• The operator must provide sufficient lighting at
the control points of the printer in accordance
with local occupational health and safety
regulations.
Furthermore, the operator is responsible for keeping
the printer in a perfect working order. The following
therefore also applies:
• The operator must ensure that all messages on
maintenance indicated at the touch panel and
described in this user manual are adhered to.
Safety information
17