Requirements For The Blackberry; Blackberry; Cdr-31 - Porsche PCM Manual

3. Pairing instructions for the CDR-31
3. Pairing instructions for BlackBerry
Requirements for the CDR-31
– The CDR-31 must be specified with the option
'preparation for mobile phone'.
– The Bluetooth function on the CDR-31 must be
®
switched on.
– The CDR-31 must be visible. For this, it must
be included in the list of devices shown under
'PHONE/OPTION/Device List'.
– The CDR-31 is not connected with a mobile phone.
Pressing the 'PHONE' button displays the message
'Find telephone'.

Requirements for the BlackBerry

– The Bluetooth function must be switched on. You can
®
switch on the Bluetooth function on the BlackBerry
®
via 'Manage connections/Bluetooth
status area indicates that the Bluetooth
switched on.
Note: The BlackBerry does not appear in the
®
search list on the CDR-31 because it has a higher
security level. In this case, therefore, you must
start the search from the mobile phone itself.
Pairing process

CDR-31

1. Press 'PHONE' button.
2. Press 'OPTION' button.
3. Select the menu item 'Device list'.
The CDR-31 is now visible to external devices.
Note:
To speed up the CDR-31's location of the

BlackBerry

, delete any devices that are no longer
®
required from the list before starting the search for
new devices.
devices with the CDR-31
®
®
®
On'. An icon in the
®
function is
®
9
BlackBerry
®
4. Select the menu item 'Manage connections/Bluetooth
connections'.
5. Press the trackball and select 'Full menu/Add device/
Search'. The BlackBerry
®
devices.
visible Bluetooth
®
6. Select 'CDR-31' from the search list on the
BlackBerry . A connection request now appears
®
on the CDR-31; you must confirm this request.
CDR-31
7. A number pad is displayed on the CDR-31; enter any
4-digit Bluetooth code of your choice (e.g. '0000')
®
and confirm with 'OK'.
BlackBerry
®
8. Enter the same Bluetooth
®
and confirm with 'OK (  )'. Pairing is now complete.
Note: The user has 30 seconds to enter the code. If
pairing is not completed within this time, it may be
necessary to repeat the process. To do this, select
'CDR-31' from the search list again.
9. A window now appears on the BlackBerry
whether the connection with the CDR-31 should be
accepted. Answer this question with 'Yes' and
confirm the item 'Do not ask this question again'
by setting a check. The CDR-31 is now authorised
on the BlackBerry . The BlackBerry
®
automatically found and connected whenever the
car is started.
®
now starts to search for
code on the BlackBerry
®
asking
®
will be
®