Pairing Instructions For Blackberry Devices With The Pcm - Porsche PCM Manual

4. Pairing instructions for the PCM
4. Pairing instructions for BlackBerry
Requirements for the PCM
– The PCM must be specified with either
'preparation for mobile phone' or 'telephone module
with wireless active handset'.
– The Bluetooth function of the PCM is switched on and
®
the PCM is not connected with a mobile phone.
Pressing the 'PHONE' button displays the message
'Find telephone'.
Requirements for the BlackBerry
– The Bluetooth function must be switched on. You can
®
switch on the Bluetooth function on the BlackBerry
®
via 'Manage connections/Bluetooth
status area indicates that the Bluetooth
switched on.
– The BlackBerry must be 'visible' to other devices. You
®
can find this setting on the BlackBerry
connections/Bluetooth connections'. The 'Visible'
®
setting must be set to 'Yes' or '2 min'.
– Automatic transfer of the phone book from the
BlackBerry to the PCM can be configured by setting
®
'Address book transfer' to 'All entries'. You can find
this setting on the BlackBerry
connections/Bluetooth connections/
®
– Only PCM with telephone module: The external SIM
Access Profile may need to be activated on the
BlackBerry to enable the telephone module to be
®
used via Bluetooth . You can find this setting under
®
'Manage connections/Bluetooth
Options'.
– To speed up the search by the PCM and allow external
SIM access, BlackBerry devices have the option of a
®
standby mode. You can find this setting under 'Manage
connections/Bluetooth connections/Add New Device/
®
Listen'.
devices with the PCM
®
®
®
On'. An icon in the
®
function is
®
under 'Manage
®
under 'Manage
®
/Options'.
connections/ /
®
13
Pairing process
PCM
1. Press 'PHONE' button.
2. Select the 'Find telephone' menu item and, where
applicable, on the next screen select the menu point
'New mobile phone'. A search is performed for
available, previously unknown Bluetooth
At the end of the search, the devices found are
displayed in a list.
Note:
On older devices, a prompt to enter a 'Passkey
for PCM' may appear on the BlackBerry
search by the PCM. You can ignore this prompt or
cancel it using the mobile phone's Back button.
3. Select the phone you want from the search list
on the PCM. You are now prompted to enter a
Bluetooth code specified by the PCM on the
®
phone. Enter the correct code and confirm with
'OK (  )' on the BlackBerry
process.
Note:
The user has 30 seconds to enter the code.
If pairing is not completed within this time, it may
be necessary to repeat the process. To do this,
select the phone you want from the search list on
the PCM again.
4. A window now appears on the BlackBerry
whether the connection with the PCM should be
accepted. Answer this question with 'Yes' and
confirm the item 'Do not ask this question again' by
setting a check. The PCM is now authorised
on the BlackBerry . The BlackBerry
®
automatically found and connected whenever the
car is started.
phones.
®
during the
®
to complete the pairing
®
asking
®
will be
®