Requirements For The Pcm; Pairing Instructions For The Pcm - Porsche PCM Manual

4. Pairing instructions for the PCM

4. Pairing instructions for Bluetooth

Requirements for the PCM

– The PCM must be specified with either
'preparation for mobile phone' or 'telephone module
with wireless active handset'.
– The Bluetooth function of the PCM is switched on and
®
the PCM is not connected with a mobile phone.
Pressing the 'PHONE' button displays the message
'Find telephone'.
Requirements for the mobile phone
– The Bluetooth function must be switched on.
®
– The mobile phone must be visible to other devices.
– Only PCM with telephone module: The external
SIM Access Profile may need to be activated on the
mobile phone to enable the telephone module to be
used via Bluetooth .
®
These two settings are normally found in the
Bluetooth settings on the mobile phone.
®
Note:
Some mobile phones can only be made
visible for a limited period of time (e.g. 1 minute).
If pairing is not completed within this time, it may
be necessary to repeat the process. Some mobile
phones respond to a pairing request by the PCM
only when their screen is active and visible.
Note for iPhone :
The iPhone
®
you are in the Bluetooth
®
access this menu on the iPhone
General/Bluetooth ' (see instructions for registering
®
iPhone on the PCM).
®
Pairing process
PCM
1. Press 'PHONE' button.
2. Select the 'Find telephone' menu item and, where
applicable, on the next screen select the menu point
'New mobile phone'. A search is performed for
available, previously unknown Bluetooth
At the end of the search, the devices found are
displayed in a list.
®
is only visible when
®
settings menu. You can
via 'Settings/
®
phones.
®
12
mobile phones with the PCM
Note for BlackBerry
PCM, a prompt to enter a 'Passkey for PCM' appears
on the BlackBerry . You can ignore this prompt or
®
cancel it using the mobile phone's Back button (see
instructions for registering iPhone
3. Select the phone you want from the search list
on the PCM. You are now prompted to enter a
Bluetooth code specified by the PCM on the phone.
®
Enter the correct code and confirm it on the mobile
phone to complete the pairing process.
Note:
The user has 30 seconds to enter the code.
If pairing is not completed within this time, it may be
necessary to repeat the process. To do this, select
the phone you want from the search list on the PCM
again.
Mobile phone
4. After pairing, the PCM attempts to connect with the
phone. On some phones, it is necessary to confirm
the connection by pressing a button on the handset.
5. On many phones, when connection is established
transfer of the phone book must also be confirmed
on the phone. We recommend always allowing the
PCM access if this option is available on the phone.
Note:
In most cases, a paired phone will be auto-
matically found and connected whenever the car is
started. In some cases (e.g. Nokia N and E series),
however, it is necessary to authorise the PCM in the
device list on the mobile phone.
:
® During the search by the
on the PCM).
®