Cleaning; Disposal; Further Information; Data Protection Notice - Porsche Wall Charger Connect Operating And Installation Manual

Installation Instructions

Cleaning

US
Check the charger for damage and soiling at regular
intervals and clean it if necessary.
FC
DANGER
Risk of serious or fatal injury due to fire or electric
ESM
shock.
e Never immerse the charger or plugs in water or
spray them directly with water (e.g. high-
pressure cleaning equipment or garden hoses).
e Only clean the charger when the control unit has
been disconnected from the vehicle. Use a dry
cloth for cleaning.

Disposal

Electrical/electronic devices can be handed in at a
collection point or waste management facility.
e Do not throw electrical/electronic devices in with
household waste.
e Dispose of electrical/electronic devices in
accordance with the applicable environmental
protection regulations.
e If you have questions about disposal, contact an
authorized Porsche dealer.

Further Information

Further information on the charger and the web
application is available under "E-Performance" at the
following web address: https://www.porsche.com
14

Data Protection Notice

To ensure that your Porsche charging equipment can
communicate properly and is always up-to-date, the
charging equipment will send the following equip-
Electric shock, fire
ment-specific data to Porsche in encrypted form at
regular intervals and process this data there: device ID,
brand, generation, device type and software version.
The following conditions also apply to the Wall
Charger Connect: In addition, the device transfers
encrypted diagnostic data to Porsche following
customer interaction. The following data is included
here: device identification, production date,
manufacturer information, country specification,
performance class, software version, event memory
entries including status information in the event of
errors. The transmitted diagnostic data is used only
for support and analysis purposes, and for product
enhancement.
If you would also like to have the option of using other
Porsche Connect services for the charging equip-
ment, you must pair your charging equipment to your
Porsche ID account, which is available from the
Porsche Connect distributor in selected markets.
While using Porsche Connect services, the following
personal data and other device-specific data
required for the provision of the services is sent to
Porsche and processed there: customer ID, statistics,
charging history information, status, connection
status and time stamp for when communication was
last established. You will find more detailed informa-
tion on the general terms and conditions and the
privacy policy at www.porsche.com/connect-store.
The regular transmission of data for your charging
equipment can incur additional costs with your
Internet supplier. The data you have saved at Porsche
can be irrevocably deleted using My Porsche. Some
of the Porsche Connect Services for the Porsche
charging equipment are not available in all countries
due to technical or legal restrictions.
Installation Instructions

Safety Instructions

Pay particular attention to the safety instructions in
this manual.
f Please see chapter "Operating Instructions" on
page 3.

Requirements and Prerequisites

Before the Wall Charger Connect is installed, the
following requirements must be complied with and
checked.
General requirements
The following are the minimum requirements that
must be fulfilled for the connection of the Wall
Charger Connect:
– The Wall Charger Connect may only be installed
by a qualified technician (electrician).
– Calculate the maximum electrical load of the
installation in order to determine the maximum
current of the wall box.
– Ensure that the voltage drop across the supply
cable is minimal.
– Only use copper conductors to connect the Wall
Charger Connect.
– Ensure that all approvals for connection of the
Wall Charger Connect have been granted and
that the installation is being/has been approved
by a qualified electrician.
– Only use connectors and cables that comply with
the local regulations so that the Wall Charger
Connect can be operated constantly at 80 A.
– Use fuses for the electrical connection. Install the
fuse and residual current device in accordance
with your charging current.