Table of Contents
Advertisement
3.4 External mains power adaptor via DC jack socket
The ISPjuno programmer 'kit' includes a mains power supply adaptor which can be used to power the
programmer via the DC jack socket.
Important note:
The jack socket on the programmer is a 2.1mm centre-positive socket.
Instructions:
•
Ensure the the ISP cable from the programmer is disconnected from any target system.
•
Plug the 2.1mm jack plug end of the power supply cable into the programmer 'DC Power
connector' socket as shown in the illustration above.
•
Plug the mains power supply into a suitable mains socket.
•
Switch on mains power --> the programmer should power up and show text on the display.
22
ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20
Advertisement
Table of Contents
