Table of Contents
Advertisement
1.0 Introduction
The ISPjuno is a portable ISP programmer designed for field-service and production In-System
Programming (ISP) applications. The programmer is capable of operating in 'Standalone Mode'
(without PC) allowing an operator to select from 1 of 64 'Standalone Programming Projects'
using the display and keypad. A single 'Autoprogram' key is then used to repetitively program the
selected project.
•
Professional grade Portable In-System (ISP) Programming system
Ideal for Field-service or Production programming applications
•
Supports 'Standalone' operation - no PC required after programmer has been configured
•
with user projects
Capable of storing up to 64 completely independent 'Standalone Programming
•
Projects'.
•
Supports In-system Programming (ISP) of many different programmable microcontrollers,
serial EEPROM / FLASH memory devices and other custom devices (relevant Device libraries
are required – chargeable upgrades)
•
Supports the following programming interfaces: AVR - SPI, AVR - JTAG, 8051 - UART, AVR -
XMEGA PDI, AVR - ATtiny TPI, AVR - ATtiny UPDI, Z-Wave – SPI, Z-Wave UART, ARM –
JTAG, ARM - SWD
•
Supports programming of devices between 3.0V and 5.0V
•
Programmer controlled target power supply capable of powering the target system at 3.0V,
3.3V, 4.7V and 5.0V
•
Interchangeable 'Target Interface Modules (TIMs)' available to cater for many different
Target ISP connector types
•
High-speed USB connection to the PC
•
Legacy RS232 COM port connection to the PC
•
Programmer can be powered from an 'External power supply' or 'External USB Power
Pack' via the 'DC jack socket'
ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20
11
Advertisement
Table of Contents
