Programmer - Controlled Power Supplies; Communication / Control Ports - Equinox Systems ISP juno User Manual

2.6 Programmer – Controlled Power Supplies
Programmer
Power Supplies
Programmable Vcc
voltage (TVCC)
Programmable Vpp
Voltage (TVPP)
External Switched Vcc
supply
Analogue voltage
measurement
Target current
measurement
Target over-current
detection
Target controlled
discharge circuit

2.7 Communication / Control Ports

The ISPjuno programmer features the following communications ports...
Communications ports
RS232 port
USB port
These ports can be found on the bottom end panel of the programmer....
18
Only 4 x pre-defined voltage levels: 3.0V, 3.3V, 4.7V and 5.0V @ 250mA
Bottom Panel
1. RS232 Connector Port
2. mini-USB Connector Port
3. External DC Power Supply Input
ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20
Value
Yes
Tolerance: +/- 5%
No - fixed VPP voltage: 12.0V
@ 100mA
Not supported
Yes
Target (TVCC)
Not supported
Not supported
Yes
ISPjuno
1
1