Equinox Systems ISP juno User Manual page 38

There are currently two Target Interface Modules (TIMs) available....
Please note:
Unless otherwise specified, these 'TIM modules' do NOT come as standard with the ISPjuno
programmer. They must be ordered separately from the programmer.
ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20
ARM TIM Module
•
Connects to ISPjuno programmer
•
Features most of the popular connector types / pin-out's used
for programming ARM microcontroller devices.
•
20-way 0.1" IDC connector - standard ARM pin-out
•
10-way 0.1" IDC connector - standard ARM pin-out
•
20-way 0.05" ARM Cortex connector - standard ARM pin-out
•
10-way 0.05" ARM Cortex connector - standard ARM pin-out
•
Molex 5-pin SWD connector
•
Each connector features an independently buffered 'Clock
output' guaranteeing good signal integrity.
•
See Appendix 2 for further information
AVR TIM Module (AVR-TIM-01-V1.0)
•
Connects to ISPjuno programmer
•
Features most of the popular connector types / pin-out's used
for programming Microchip (formerly Atmel) AVR
microcontroller devices.
•
10-way 0.1" IDC connector - standard Equinox pin-out
•
10-way 0.1" IDC connector - standard AVR JTAG pin-out
•
6-way 0.1" IDC connectors for:
- standard AVR SPI (ISP) pin-out
- AVR XMEGA PDI pin-out
- AVR TPI pin-out
- AVR UPDI pin-out
•
Each connector features an independently buffered 'Clock
output' guaranteeing good signal integrity.
•
See Appendix 3 for further information
37