1. Determine the hole positions based on the
marking-off template, and then mark the hole
positions using a marker.
2. Install expansion bolts.
Support-mounted Installation
1. Determine the hole positions
based on the marking-off
template, and then mark the
hole positions using a marker.
2. Drill holes. (You are advised to
apply anti-rust paint to the
holes.)
Pole-mounted Installation
•
If you need to pole-mount the smart array controller, prepare pole mounting brackets based on
the dimensions of the smart array controller. You are advised to use M12 U-shaped bolts to
secure the pole-mounting brackets.
•
The figure is for reference only. The actual pole and pole mounting brackets prevail.
3. Secure the cabinet.
3. Install bolt assemblies.
15
4. Secure the cabinet.