Huawei SmartACU2000D Quick Manual page 19
Smart array controller with no pid module
Hide thumbs
Also See for SmartACU2000D:
- User manual (92 pages) ,
- Quick manual (31 pages) ,
- User manual (110 pages)
Advertisement
5. Connect the GE4 port on the SmartModule to the LAN port on the SmartLogger using the
network cable delivered with the SmartModule.
6. Connect the preinstalled RS485 cable to the COM port on the SmartLogger based on the
label.
7. Connect the preinstalled power cable to the 12V 1A port on the SmartModule based on the
cable label.
5.3
(Optional) Installing the Ethernet Switch
1. Remove the panel from the Ethernet
switch installation position.
2. Secure the Ethernet switch.
3. Connect the PE cable for the Ethernet
switch.
18
Advertisement
