Huawei SmartACU2000D Quick Manual page 20

Smart array controller with no pid module

Hide thumbs Also See for SmartACU2000D:

4. Connect the FE1 port on the Ethernet

switch to the WAN port on the

SmartLogger using the network cable

delivered with the Ethernet switch.

5. Connect the preinstalled power cable

to the power port on the Ethernet

switch based on the label.

5.4

(Optional) Installing the 24 V Power Module

1. Remove the mounting bracket of the 24 V power module from the cabinet.

2. Install the power module in the mounting bracket.

3. Secure the 24 V power module to the mounting bracket using the screws (delivered with the 24 V

power module)

4. Install the power module in the cabinet.

5. Connect the AC input power cable (delivered with the SACU) to the 24 V power module based on

the cable label.

Table of Contents