Market Forge Industries UniVerse Plus Series Installation & Operation Manual page 4

INSTALLATION & OPERATION MANUAL, GAS TILTING SKILLETS,
MODELS: 30P-STGL, 30P-STGL-LX, 40P-STGL, 40P-STGL-LX,
30P-STGM, 30P-STGM-LX, 40P-STGM, 40P-STGM-LX
The following general safety notices supplement the specific warnings and cautions contained
in this technical manual. They are recommended precautions that must be understood and
adhered to during the installation, operation, and maintenance of these electrically operated
appliances.
WARNING: Do not get water on wiring in controls. Be sure to wash
inside of skillet pan, inside of cover including under drip-lip, and
pouring spout area.
CAUTION: Do not install in such a manner that the service person
cannot remove the control box cover.
Supply wires must be suitable for temperature of at least 90 C. Additionally, all wiring must
conform to the requirements of local and national electric codes. Conduit and fittings should be
watertight type.
Unit is equipped with an interlock switch that shuts off gas to the burners when skillet pan is
more than 10 above normal horizontal cooking position.
Part No. 10158R3
SUMMARY OF SAFETY NOTICES
4 2019-05-24