Table of Contents
Advertisement
1
Getting Started
Power up the controller
C A U T I O N
Install the software
N O T E
8
If you are using a remote controller, install the cable
interface and then power up the host PC. If you are using a
Keysight M9021A cable interface, refer to the Keysight
M9021A documentation for further details.
If you are using a remote controller, you must power up the chassis
BEFORE you power up the PC.
When you power down your system, shut down the PC BEFORE you
power down the chassis.
If you are using an embedded controller, complete the
following steps:
1 Install the embedded controller module into a compatible
chassis. The Keysight M9018A PXIe chassis is
recommended. Refer to the Keysight M9018A
documentation for further details.
2 Connect peripherals (mouse, keyboard, monitor).
3 Power up the chassis.
The M9168C/68E/69E software is located on the
M9168C/68E/69E Product Software and Information CD
(M9168- 10001). This software is also available for download
at www.keysight.com/find/PXIattenuator.
The Keysight IO Libraries Suite (which includes the Keysight
Connection Expert) is located on the Keysight IO Libraries
Suite CD (E2094- 60003). It is also available at
www.keysight.com/find/iosuite.
Version 16.0 (or newer) of the Keysight IO Libraries Suite is required.
M9168C/68E/69E Startup and Service Guide
Advertisement
Table of Contents
