Environmentally-Friendly Disposal - Carl Valentin DYNACODE II Service Instructions Manual

Safety Instructions
Additional precautions
to be heeded for
devices with exposed
energized parts
Tools
What to do in case an
accident occurs
10

Give another person the task of remaining near the workplace.
This person must be familiar with the location and operation of
the emergency-stop and power switches and switch off the
power if danger arises.

Use only one hand while working on electrical circuits when a
device is switched on. Hold the other hand behind your back or
put it in your jacket pocket.
This prevents the electricity from flowing through your body.

Do not use worn or damaged tools.

Use only tools and testing equipment that is suitable for the
respective task.

Proceed in a very cautions and calm manner.

Avoid endangering yourself.

Switch the power off.

Request medical help (emergency physician).

Call for first aid if necessary.

2.3 Environmentally-Friendly Disposal

Manufacturers of B2B equipment are obliged to take back and
dispose of old equipment that was manufactured after 13 August
2005. As a principle, this old equipment may not be delivered to
communal collecting points. It may only be organised, used and
disposed of by the manufacturer. Valentin products accordingly
labelled can therefore be returned to Carl Valentin GmbH.
This way, you can be sure your old equipment will be disposed of
correctly.
Carl Valentin GmbH thereby fulfils all obligations regarding timely
disposal of old equipment and facilitates the smooth reselling of these
products. Please understand that we can only take back equipment
that is sent free of carriage charges.
The electronics board of the printing system is equipped with a
battery. This must only be discarded in battery collection containers or
by public waste management authorities.
Further information on the WEEE directive is available on our website
www.carl-valentin.de.
Service Instructions
Dynacode II
05.17