Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for New England Arbors Heartwood Grande Arbor
Summary of Contents for New England Arbors Heartwood Grande Arbor
- Page 1 ASSEMBLY GUIDE Heartwood Grande Arbor VA68898 VER 1.27 11/26/19...
- Page 2 GETTING STARTED First off, allow us to say thank you for the investment you have made in our fine Arbor. This Arbor is designed to be assembled and installed by two people with basic carpentry knowledge and tools. Do not attempt alone, especially during the installation stage. When assembling components, place on a non-abrasive surface (ie: shipping box) to avoid scratching.
-
Page 3: Table Of Contents
IN THIS GUIDE MATERIALS OVERVIEW MATERIALS BREAKDOWN HAMMERING T-NUTS INTO POSTS AND LEFT/RIGHT BRACES ATTACHING ONE RAIL, TWO POSTS AND LATTICE TOGETHER ATTACHING SECOND RAIL TO BOTTOM OF POST ATTACHING BEAM ENDS AND BRACES TO SUPPORT BEAM ATTACHING SUPPORT BEAM ASSEMBLY TO POSTS SECURING BRACES TO POSTS ATTACHING FILTERS TO SUPPORT... -
Page 4: Materials Overview
MATERIALS OVERVIEW 1. 12029 - Filter (x8) 1” x 4” x 36 7/16” (2.48cm x 10cm x 92.50cm) 2. 12030 - Brace Right (x2) 2” x 3 1/8” x 20” (5cm x 8cm x 50cm) 3. 12024 - Rail (x4) 1 3/8”... -
Page 5: Materials Breakdown
MATERIALS BREAK DOWN 12032 - BEAM 12030 - 12024 - RAIL 12029 - FILTER (X2) BRACE RIGHT (X4) (X8) (X2) 12031 - BRACE 12033 - BEAM 12034 - BEAM LEFT END RIGHT END LEFT (X2) (X2) (X2) 20065 - T-NUT, WASHER, BOLT 2” (5CM) (X20) 20055- SCREW A - 3 1/8”... -
Page 6: Hammering T-Nuts Into Posts
Step 1 HAMMER IN T-NUTS INTO POSTS AND LEFT/ RIGHT BRACES (X20) 12031 - BRACE LEFT (X2) 12026- POST (X4) 12030 - BRACE RIGHT (X2) VER 1.27 11/26/19... -
Page 7: Attaching One Rail, Two Posts
Step 2 ATTACHING ONE RAIL, TWO POSTS AND LATTICE TOGETHER 3 1/8” (8CM) (X2) OPEN LATTICE VER 1.27 11/26/19... -
Page 8: Attaching Second Rail To
Step 3 ATTACHING SECOND RAIL TO BOTTOM OF POST Repeat steps 2 and 3 for second arbor panel 3 1/8” (8CM) (X2) VER 1.27 11/26/19... -
Page 9: Attaching Beam Ends And
Step 4 ATTACHING BEAM ENDS AND BRACES TO SUPPORT BEAM 2” (5CM) (X8) Repeat steps 4 A) and B) for second support beam assembly VER 1.27 11/26/19... -
Page 10: Attaching Support Beam
Step 5 ATTACHING SUPPORT BEAM ASSEMBLY TO POSTS Repeat for second beam assembly! 2” (5CM) (X12) VER 1.27 11/26/19... -
Page 11: Securing Braces To Posts
Step 6 SECURING BRACES TO POSTS 1 3/4” (4.5CM) (X4) 2 3/8” (6CM) (X4) VER 1.27 11/26/19... -
Page 12: Attaching Filters To Support
Step 7 ATTACHING FILTERS TO SUPPORT BEAM ASSEMBLY 3” 2 3/8” (6CM) (X16) VER 1.27 11/26/19... -
Page 13: Attaching Metal Stakes To
Step 8 ATTACHING METAL STAKES TO POSTS 1 1/4” (3.18CM) (X8) 7 7/8” (20cm) VER 1.27 11/26/19... -
Page 14: Option 1: Securing Arbor Into
Option 1 SECURING ARBOR INTO GROUND With a helper and yourself placed on either side, raise the arbor over desired area and press stakes into ground. This will keep your Arbor from tipping over. Depending on how hard your ground soil is, you may use a mallet to hammer down each top corner of your arbor. -
Page 15: Option 2 (Step 1): Distance
Option 2 STEP 1: DISTANCE BETWEEN WOOD POSTS MATERIALS NEEDED: Determine the area you want to start building your arbor. At one end of the desired area, hammer one wooden stake into the ground, tie a piece of string around it and measure to a length of 85 (216cm). This is where your second wood stake needs to be hammered into the ground. -
Page 16: Option 2 (Step 2): Securing
Option 2 STEP 2: SECURING ARBOR INTO CONCRETE FOOTINGS Carefully move your arbor to the side. With your desired area choosen, measure and mark the location of posts and dig 4 holes, 18” deep and 6” in diameter. Place your arbor now in the 6”... - Page 17 We’re here for you. If you have any questions at all, don’t hesitate to contact us. NORTH AMERICA TOLL FREE 1-800-282-9346 UNITED KINGDOM (44) 2038 687160 Visit our website to chat with a support technician. WWW.NEWENGLANDARBORS.COM WWW.NEWENGLANDARBORS.CO.UK VER 1.27 11/26/19...
Need help?
Do you have a question about the Heartwood Grande Arbor and is the answer not in the manual?
Questions and answers