Related Manuals for fantastic furniture Monaco Tallboy 4 Drawer
Summary of Contents for fantastic furniture Monaco Tallboy 4 Drawer
- Page 1 Version 1.0 MONACO TWO PEOPLE Tallboy 4 Drawer www.fantasticfurniture.com.au REQUIRED...
- Page 2 Enjoy Your purchase from Australia's Best Value Furniture Store WARNING: ENSURE THE WALL BRACKET IS ATTACHED TO AVOID SERIOUS INJURY. To avoid any serious or fatal injury, this product has been fitted with a wall bracket to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface.
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. Never use power tools unless instructed. before you begin. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What you need Top Panel (P1) to assemble the product Upper Back Panel Right Side Back Rail (P6) (P12) Panel (P4) Lower Front Rail (P5) Other tools you need Back Panel Flat head screwdriver; Phillips head (P13) Left Side screwdriver; Mallet (P9) Panel (P3) (P10) - Page 5 Step 1 You will need 4 x Big Cam 1 x Wall Bracket (H13) Bolt (H1) 1 x Screw Phillips head (H7) screwdriver (P1) Screw 4 x Big Cam Bolts (H1) into Top Panel (P1) as shown. Fasten Wall Bracket (H13) on Top Panel (P1) with Screw (H7).
- Page 6 Step 3 You will need (P4) 4 x Big Cam 2 x Big Wood Dowel (H4) Bolt (H1) (P4) 4 x Slide 12 x Screw Track (H17-1) (H7) Phillips head Mallet (P4) screwdriver Insert 2 x Big Wood Dowels (H4) into Right Side Panel (P4). Screw 4 x Big Cam Bolts (H1) into Right Side Panel (P4).
- Page 7 Step 5 You will need (P5) 4 x Big Cam Flat head (P6) Nut (H2) screwdriver This is how a cam nut works..(P2) The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 8 Step 7 You will need 4 x Big Cam Flat head Nut (H2) screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 9 Step 9 You will need 5 x Bolt Allen Key (H3) (H12) (P2) (P14) Attach Metal Bar (P14) onto Bottom Panel (P2) with 5 x Bolts (H3) using Allen Key (H12). With help, carefully turn the assembled unit over. Step 10 You will need (P1) 4 x Big Cam...
- Page 10 Step 11 You will need (P1) 6 x Plastic 6 x Screw Fixture (H15) (H14) (P12) Phillips head (P13) screwdriver XX = YY If necessary, gently adjust the Top Panel (P1) sideway in either direction until XX and YY are equal. Fix the Back Panel Connectors (H15) with Screws (H14) as shown.
- Page 11 Step 13 You will need Insert 1x Small Wood Dowel (H5) into each Drawer left Side (P8) and Drawer Right Side 16 xSmall (P9) as shown. 8 xSlide Runner(H17-2) Cam Bolt (H10) Attach 1 x Slide Runner (H17-2) onto each Drawer Side (P8) &...
- Page 12 Step 15 You will need (P7) 16 x Small Phillips head Cam Nut (H9) screwdriver (P9) (P11) (P8) Position Drawer Front (P7) onto Drawer Sides (P8) & (P9). Rotate 1x Small Cam Nut (H9) so the arrow points towards the incoming cam bolt and insert the Small Cam Nut (H9) into Drawer Side Panel (P8) or (P9).
- Page 13 Step 17 √ (P7) (P3) (P7) (P7) (P7) Move Inner Ball Bearing Track outward. Push Middle Track in. Gently Insert Slide Runner into Ball Bearing Track. (P7) Position Drawer so that Slide Runner (H17-2) aligns with Slide Track (H17-1) as shown. Gently push drawer into the closed position.
- Page 14 Step 18 (P15) (P15) If the Tallboy is not level, you can adjust the height of each Leg by turning the feet of Legs clockwise or counter-clockwise. www.fantasticfurniture.com.au PAGE 14...
-
Page 15: Job Complete
Step 19 Job Complete ! In the interest of our environment Please dispose of all packaging thoughtfully. www.fantasticfurniture.com.au PAGE 15... - Page 16 THIS TOP IS FINISHED WITH A CLEAR PU LACQUER Avoid placing hot items directly onto the surface unless using a thick insulation material such as placemats or coasters. Heat may lead to discolouration or other damage to the surface of the product. Use a soft cloth that has been dampened in water to clean the surface of this product.