Advertisement
Step 7
You will need
4 x Big Cam
Flat head
Nut (H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Position Left Side Panel (P3) onto Bottom Panel (P2) &
Front Rail (P5) & Back Rail (P6).
If necessary, adjust the panels to allow Upper Back Panel
(P12) & Lower Back Panel (P13) to fit into the groove of
Left Side Panel (P3)
Insert 4 x Big Cam Nuts (H2) into Panels (P2) & (P5) & (P6)
and turn clockwise to lock.
Step 8
You will need
12 x Bolt
Allen Key
(H16)
(H12)
Fix each Metal Leg (P15) to Bottom Panel (P2) with 3 x Bolts (H16)
using Allen Key (H12).
www.fantasticfurniture.com.au
(P2)
(P15)
(P15)
(P15)
(P15)
PAGE 8
Advertisement
