Advertisement
Step 1
You will need
4 x Big Cam
1 x Wall
Bracket (H13)
Bolt (H1)
1 x Screw
Phillips head
(H7)
screwdriver
Screw 4 x Big Cam Bolts (H1)
into Top Panel (P1) as shown.
Fasten Wall Bracket (H13) on
Top Panel (P1) with Screw (H7).
Do not fully tighten the Screw (H7).
Step 2
You will need
4 x Big Cam
2 x Big Wood
Dowel (H4)
Bolt (H1)
8 x Slide
12 x Screw
(H17)
(H7)
Phillips head
Mallet
screwdriver
Insert 2 x Big Wood Dowels (H4) into Left Side Panel (P3).
Screw 4 x Big Cam Bolts (H1) into Left Side Panel (P3).
Attach 4 x the Separated Slide Tracks (H17-1) onto
Left Side Panel (P3) with 12 x Screws (H7).
www.fantasticfurniture.com.au
Separate the 8 sets of Slide Runners (H17-2) and Slide Tracks (H17-1)
from Slides (H17) by following the steps below:
Extend the Slide Runner all the way forward.
Press the plastic release lever of the slide down and
pull the Slide Runner (H17-2) completely out.
(P3)
(P3)
(P1)
PAGE 5
Advertisement
