Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Ashford Tallboy 5 Drawer
Summary of Contents for fantastic furniture Ashford Tallboy 5 Drawer
- Page 1 Version 2.0 Ashford Tallboy 5 Drawer www.fantasticfurniture.com.au...
- Page 2 WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY. To avoid any serious or fatal injury, this product has been provided with a wall strap to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface. Fixing devices are not included since different surface materials require different attachments.
-
Page 3: Assembly Checklist
Assembly checklist Make sure you have all the required tools. Read through the instructions carefully Never use power tools unless instructed. before you begin. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What You Need To Assemble the Product (Other Tools You Need) Phillips Head Screwdriver Mallet Top Panel (P1) Top Panel Rail Right Side Part LIst (P5) (P3) Box 1: 1 x Top Panel (P1); Back Panel 1 x Left Side (P2); (P11) 1 x Right Side (P3);... - Page 5 Step 1 You will need: 6 x Cam bolts (H1) Phillips head screwdriver (P1) Fix 6 x Cam Bolts (H1) to Top Panel (P1) by using a Phillips head screwdriver. Step 2 You will need: 3 x Wood Screws (H4) Phillips head screwdriver (P1)
- Page 6 Step 3 You will need: x 15 2 x Wooden Dowels (H3) 5 x Left Runner Track (H11) 15 x Wood Screws (H9) Phillips head screwdriver Mallet Insert 2 Wooden Dowels (H3) to Left Side (P2). Fix 5 Left Runner Track (H11) to Left Side (P2) by using 15 Wood Screw (H9) and a Phillips head screwdriver.
- Page 7 Step 5 You will need: 3 x Wood Screw (H4) 7 x Cam bolts (H1) (P4) Note the position of Phillips head bevelled edge screwdriver Attach Side Plinth (P4) to Left Side (P2) by using 3 Wood Screws (H4) and a Philip head screwdriver.
- Page 8 Step 7 (P6) You will need: 14 x Wooden Dowels (P8) (H3) Mallet (P9) (P10) Insert Dowels (H3) to Front Rails (P6) and Front Support Rail (P8) and Back Rail (P9) and Back Suport Rail (P10). Step 8 You will need: 4 x Wood Screws (H4)
- Page 9 Step 9 (P2) You will need: 2 x Cam (H2) Phillips head screwdriver (P9) This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam (P10) nut so it tightens over the bolt.
- Page 10 Step 11 (P3) You will need: 7 x Cam Nuts (H2) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 11 Step 13 You will need: 6 x Cam Nuts (H2) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 12 Step 15 You will need: 5 x Cam bolts (H18) (P12) Phillips head screwdriver (P17) Fix small Cam Bolts (H18) to Drawer Front (P12) and Large Drawer Front (P17) by using a Phillips head screwdriver. Step 16 (P13) You will need: 16 x Wood Screws (H10)
- Page 13 Step 17 You will need: 4 x Cam Nuts (P16) (H19) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 14 Step 19 You will need: 24 x Wood Screws (P14) (H10) Phillips head screwdriver Use Wood Screws (H10) to fix Drawer Back panel to Drawer Sides and Drawer Support Rails. Step 20 (H9) You will need: 24 x Wood Screws (H9) (H14) 4 x left...
- Page 15 Step 21 You will need: 16 x Screws (H7) 8 x Handles (H8) Phillips head screwdriver Steps to assemble small drawers. Fix Handles (H8) on drawer front by using Screws (H7). Step 22 You will need: 4 x Wood Screws (H10) Phillips head screwdriver...
- Page 16 Step 23 You will need: 1 x Cam Nuts (P16) (H19) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 17 Step 25 You will need: 6 x Wood (P19) Screws (H10) Phillips head screwdriver Steps to assemble large drawer. Use Wood Screws (H10) fix the drawer box as show on picture Step 26 (H9) You will need: 6 x Wood Screws (H9) (H14)
- Page 18 Step 27 You will need: 4 x Screws (H7) 2 x Handles (H8) Phillips head screwdriver (H8) Steps to assemble large drawer. Fix Handles (H8) on drawer front by using Screws (H7). Step 28 (P12) (P17) Slide the drawers into the carcase of the tall boy, large drawer box place on the bottom, the other drawer box are the same.
- Page 19 Step 29 You will need: 1 x Wall Strap (H16) 1 x Washer (H17) We strongly advise that you use the wall safety strap provided to 1 x Wood prevent the unit toppling. Screws (H10) Phillips head screwdriver Fix Wall Strap (H16) to back of the Top Panel by using Wood Screw (H10) and Washer (H17).
- Page 20 Step 30 You will need: 1 x Washer (H17) Phillips head screwdriver Screw and Wall Plug are not provided. Please use appropriate fixtures for your wall. Seek advice from a qualified trades person on how to attach safety strap to the wall .
- Page 21 PAGE 21 www.fantasticfurniture.com.au...