Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture COMO TALLBOY 6 DRW
Summary of Contents for fantastic furniture COMO TALLBOY 6 DRW
- Page 1 Assembly Instructions COMO TALLBOY 6 DRW...
- Page 2 WARNING WARN NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Lay out all of the components on a soft surface Read Instructions carefully. as if you were preparing to do a jigsaw puzzle. Check no parts are missing.
- Page 3 What You Need To Assemble The Body Right Drawer Drawer Back Side (Tools not provided) (P18) (P16) Flat BladeScrewdriver Top Panel Phillips Head Screwdriver Mallet (P1) Right Side Panel Drawer Base (P3) ×2 (P17) Rail (P9) Rail (P5) Left Drawer Divider Drawer Front Rail...
- Page 4 Step 1 You will need: 5 x CL Runner Tracks (H6) 15 x Small Screws (P2) (H5) Attach 5 x CL Runner Tracks (H6) to Left Side Panel (P2) with 15 x Small Screws (H5). Step 2 You will need: 5 x CR Runner Tracks (H7)
- Page 5 Step 4 You will need: 1 x CL Runner Track (H6) (P4) 3 x Small Screws (H5) Attach 1 x CL Runner Track (H6) to Divider (P4) with 3 x Small Screws (H5). Step 5 You will need: 1 x CR Runner Track (H7) 3 x Small...
- Page 6 Step 7 (P5) (P9) You will need: (P6) 5 x Cam Nuts (P5) (H4) (P7) (P5) (P8) (P10) This is how a cam nut works ..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 7 Step 9 You will need: 22 x Small Screws (H5) (P2) (P11) (P12) (P11) (P3) Join 2 x Back Panels (P11) with Connect Stick (P12),then put into the groove on the back of the chest,screw it with 22 x Small Screws (H5). Step 10 20mm You will need:...
- Page 8 Step 11 You will need: 6 x Cam Bolts (H3) (P1) Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown. Step 12 (P1) You will need: 8 x Dowels (H1) (P4) 6 x Cam Nuts (H4) (P3) (P2) Insert 8 x Dowels (H1) into the holes of Side Panels (P2,P3), Divider (P4) and Rail (P9).
- Page 9 Step 13 You will need: 4 x Small Cam Bolts (H10) (P13) Attach 4 x Small Cam Bolts (H10) into Drawer Front (P13). This is how a cam nut works ..Step 14 The head of the cam bolt goes into the open You will need: mouth of the cam nut.
- Page 10 Step 16 You will need: (P18) 4 x Long Screws (H2) (P15) (P16) Attach Drawer Back (P18) to Drawer Sides (P15) (P13) and (P16) with 4 x Long Screws (H2),make sure that the groove lines up the whole way around the drawer. Step 17 (P16) You will need:...
- Page 11 Step 20 You will need: Dowel (H1) 5 x Small Cam (P19) Bolts (H10) Insert 1 x Dowel (H1) into Drawer Front (P19),and attach 5 x Small Cam Bolts (H10) into it. Step 21 This is how a cam nut works ..The head of the cam bolt goes into the open You will need:...
- Page 12 Step 23 You will need: 6 x Long (P15) Screws (P21) (H2) (P20) (P16) (P19) Attach Drawer Back (P21) to Drawer Sides (P15) and (P16) with 4 x Long Screws (H2), then attach Drawer Back (P21) to Support Rail (P22) with 2 x Long Screws (H2). Make sure that the groove lines up the whole way around the drawer.
- Page 13 Step 26 (P14) (P13) Put the drawers into the chest,the drawer with Drawer Front (P13) on the left side, and the other one on the right side.So the drawer fronts align with the outside of the side panels. Please make sure your chest is sitting squarely on the floor, then tighten all the screws and bolts –...
- Page 14 Step 27 We strongly advise that you use the wall safety strap provided to You will need: prevent the unit toppling 1 x Safety Strap (H12) 1 x Screw (H13) 1 x Washer (H14) Attach Safety Strap (H12) to the Top Panel (P1) using 1 x Screw (H13) and 1 x Washer (H14). Step 28 Seek advice from a qualified trades person on how to...