Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture HAVANA Tallboy 5 Drawer
Summary of Contents for fantastic furniture HAVANA Tallboy 5 Drawer
- Page 1 Version 1.0 HAVANA Tallboy 5 Drawer www.fantasticfurniture.com.au...
- Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
Top Panel What you need (P1) RR Leg (P10) to assemble the product Right Side Panel (P3) Back Panel (P11) DO NOT USE Additional Tools Required Flat head screwdriver; Rail Phillips head screwdriver; Hammer (P4) Rail (P4) (P9) Rail (P6) Parts list Rail Box 1: Top Panel (P1);... - Page 5 Step 1 You will need 16 x Cam Bolts Phillips head (H3) screwdriver (P10) (P9) (P8) Attach 16 x Cam Bolts (H3) into Legs (P7, P8, P9, P10). (P7) Step 2 (P9) You will need 12 x Small 16 x Cam Nuts Dowels (H2) (H4) (P7)
- Page 6 Step 3 You will need 5 x CL Runner 15 x Small (P9) Track (H6) Screws (H5) (P7) (P2) Phillips head screwdriver Attach 5 x CL Runner Tracks (H6) to Left Side Panel (P2) with 15 x Small Screws (H5). Step 4 You will need (P8)
- Page 7 Step 6 (P4) You will need (P4) (P7) (P5) 4 x Small 4 x Cam Nuts Dowels (H2) (H4) (P2) (P6) Flat head screwdriver (P9) Insert 4 x Small Dowels (H2) into Left Side Panel (P2) and Legs (P7, P9). Insert 4 x Cam Nuts (H4) into the holes of Rails (P4, P5, P6).
- Page 8 Step 8 (P11) (P10) You will need 4 x Dowels (H1) (P8) (P9) make sure the arrow label is facing top when slide (P6) in the back panel (P7) Carefully turn the tallboy over to an upright position. Slide Back Panels (P11) into the grooves in Legs (P9, P10) and Rail (P6). Insert 4 x Dowels (H1) into Legs (P7, P8, P9, P10) as shown.
- Page 9 Step 10 You will need Cam Bolts Phillips head (H3) screwdriver (P1) Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown. Step 11 (P1) You will need 6 x Cam Nuts Flat head (H4) screwdriver (P8) (P9) (P2) (P7) Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2, P3) and Legs (P7, P8, P9, P10).
- Page 10 Step 12 You will need 4 x Wedges 4 x Screws (H15) (H16) (P4) 2 x Small Phillips head Screws (H5) screwdriver (P11) Make sure Wedge (H15) is facing to the bottom of Top Panel (P1). Secure Back Panel (P11) in place with 4 x Wedges (H15) using 4 x Screws (H16). Use 2 x Small Screws (H5) to fix Back Panel (P11) onto Rail (P4).
- Page 11 Step 14 (P17) (P13) You will need 1 x Small 5 x Small Cam Dowel (H2) Nuts (H11) (P14) Flat head screwdriver (P12) Insert 1 x Small Dowel (H2) into Drawer Front (P12) as shown. Insert 5 x Small Cam Nuts (H11) into the holes of Drawer Sides (P13, P14) and Drawer Support (P17). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 12 Step 17 (P14) You will need 1 x DL Runner 1 x DR Runner (H8) (H9) (P13) 4 x Small Phillips head Screws (H5) screwdriver Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P13) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P14) with 4 x Small Screws (H5).
- Page 13 Step 20 dresser Put the drawers into the We strongly advise that you use Step 21 the wall safety strap provided to prevent the unit toppling You will need 1 x Safety 1 x Screw Strap (H18) (H19) 1 x Washer Phillips head (H20) screwdriver...
-
Page 14: Job Complete
Step 22 Seek advice from a qualified trades person on how to attach this safety strap to You will need your specific wall. 1 x Washer Phillips head Wall screwdriver (H20) Screw and Wall Plug which are not provided. Please use appropriate fixtures for your wall.