Things to keep in mind when installing outdoors
- Enclosures should be purchased separately if needed.
- After mounting the product, check the tightness of the connection between the AHU and the
enclosure.
If the connection is not airtight, moisture or dust could contaminate the product.
- When installing the AHU outdoors, be sure to use an enclosure to protect the control kit.
- The enclosure should be made of SUS or painted sheet metal to prevent corrosion.
- Make the structure so that it is easy to perform wiring tasks.
- The installation form and location may vary by site.
- Panels installed outdoors must be installed in a place that is not exposed to direct sunlight.
CAUTION
!
Exposure to direct sunlight could raise the temperature inside the control kit and cause the
unit to malfunction.
AHU CONTROL KIT INSTALLATION
AHU
Control
kit
11
Additional
enclosure