Using The Appliance With Remote Control; Preparing Before Operation; Inserting The Batteries Into The Wireless Remote Control; Installing The Remote Control Holder - LG ATNQ36GNLT1 Owner's Manual

Using the Appliance with
Remote Control
Follow these steps to see a detailed guide for using
the product with the remote control.
1
Click the below website address.
• www.lg.com
2
Insert the model name in the search box.
• The model name is on the remote control or
printed on the box in which the remote
control is packed.
3
Search the manual that you want to see.
NOTE
• Some models do not have a manual on the
website. For those models, refer to the manual
included with the remote control.
Preparing before
Operation
Inserting the Batteries into the
Wireless Remote Control
Insert AAA (1.5 V) batteries into the wireless remote
control.
1
Remove the battery cover and insert the new
batteries, making sure that the + and –
terminals of the batteries are oriented
correctly.
2
Reattach the cover by sliding it back into
position.
NOTE
• When the wireless remote control display begins
to fade, replace the AAA (1.5 V) batteries.
• If the system is not going to be used for a long
time, remove the batteries to save their working
life.
• Do not use old and new batteries together.
Installing the Remote Control
Holder
1
Choose a suitable place where its safe and easy
to reach.
2
Fix the firmly to the wall with the supplied
screws.
3
Slide the remote controller inside the holder.
NOTE
• The remote controller should never be exposed
to direct sunlight.
• The signal transmitter and receiver should
always be clean for proper communication. Use
a soft cloth to clean them.
OPERATION
17