LG PAHCNM000 Owners & Installation Manual page 21

- Thermistor
Item
Thermistor
Ex: SA (Supply) Thermistor Connection
CAUTION
!
• Improper wiring of the sensor can damage the AHU CONTROL KIT. Make sure to check for
any incorrect wiring before turning the power on.
1. For more information on the installation of temperature sensors, refer to the Manual that
came with the sensor.
2. Make sure to finish all the sensor wires with a flexible tube.
3. Using a thermistor outside the temperature range different from the above specifications
can cause the unit to malfunction.
However, the temperature range can be adjusted in HMI Settings.
Specification
- Power: AC 24 V
- Output signal: DC 0~10 V
- Temperature range: -50 °C~50 °C
<Main module>
AC 24 V(G)
AC 24 V(G)
<Terminal block>
AHU SENSOR CONNECTION
DC 0~10 V(Temperature,U1)
Ground (G0)
Ground (G0)
21
Remark
Optional