Ahu Sensor Specification - LG PAHCNM000 Owners & Installation Manual

AHU SENSOR SPECIFICATION

18
AHU SENSOR SPECIFICATION
Sensor/Actuator Spec.
Standard specifications of the sensor used in the control kit are as follows.
Item
Damper Actuator
Temperature/Humidity
Sensor
Thermistor
Filter Differential Sensor
Static Pressure Sensor
CO sensor
2
Smoke Detector
CAUTION
!
• Our AHU doesn't support resistance-type sensors. Using an resistance-type sensor can
cause a discrepancy between the actual temperature and measured temperature, which
can cause the product to malfunction.
• Please install a voltage-type sensor as shown above.
• Sensors and actuators are sold separately. Purchase and install the required sensors based
on the load or function.
• In order to operate normally, either a THERMISTOR or a humidity sensor must be installed.
- Power: AC 24 V
- Input/output signal: DC 0~10 V
- Torque: 15 N·m
- Operation time: 150 s.
- Rotation Angle: 90˚
- Power: AC 24 V
- Output signal: DC 0~10 V
- Temperature range: -40 °C~70 °C
- Humidity range: 0~95 % RH
- Power: AC 24 V
- Output signal: DC 0~10 V
- Temperature range: -50 °C~50 °C
- Power: AC 24 V
- Output signal: DC 0~10 V
- Range: 0~1 000 Pa
- Switch type: Relay open/close
- Power: AC 24 V
- Output signal: DC 0~10 V
- Range: 0~1 000 Pa
- Power: AC 24 V
- Output signal: DC 0~10 V
- Range: 0~2 000 ppm
- Power: AC 24 V
- Type: Contact
Specification