AHU SENSOR CONNECTION
24
- CO
sensor
2
Item
CO
sensor
2
Ex: CO
Sensor Connection
2
CAUTION
!
• Improper wiring of the sensor can damage the AHU CONTROL KIT. Make sure to check for
any incorrect wiring before turning the power on.
1. For more information on the installation of CO
with the sensor.
2. Make sure to finish all the sensor wires with a flexible tube.
3. The setting for the CO
Specification
- Power: AC 24 V
- Output Signal: DC 0~10 V
- Range: 0~2 000 ppm
AC 24 V(G)
Ground (G0)
AC 24 V(G)
<Terminal block>
<UI module>
sensor can be changed in the setting section of the HMI.
2
Ground (G0)
DC 0~10 V(Y, Feedback)
sensors, refer to the Manual that came
2
Remark
Optional