TVS APACHE RTR 200 4V Training Handbook page 25

If slackness if found more or less, adjust the
l
slackness as follows:
Note:
Excess chain slackness consumes more fuel.
Slightly loosen the hexagonal flanged U-nut
l
(M14x1.5) of axle rear.
22 mm spanner
Loosen and adjust the chain adjusting bolts (A and B)
l
'in' or 'out' equally by looking at the line mark (C and
D) on chain adjusters until the specified play
(slackness) is obtained.
12 mm spanner
Caution:
Adjust both the chain adjuster exactly the
same amount to maintain correct wheel
alignment
After obtaining the specified play, rotate the rear
l
wheel by hand and apply rear brake.
Hold the brake pedal in applied condition and
l
tighten the rear axle nut to the specified torque.
Now, tighten the chain adjusting bolts (A and B).
l
Using TRU SPRAY lubricate the chain while
l
rotating the wheel slowly.
Benefits of Using Tru Spray over oil :-
Better Lubrication :- Lubricates the pins of rollers
more efficiently.
Adheres to the surface longer
than oil.
Smooth Operation:- Penetrates into rollers and
frees up the pins.
Frees up the rusted links better
than oil.
Longer Life:- Prevents rust formation.
Repels water.
Reduces wear and tear when
used periodically.
C
-24-
B
A
D