Table 3. Local Mode Programming Instructions - Continued
Function Code(s)
70
Indicator LED
Mode (70)
71
Enable/Disable
Keyboard Key
Clicks (71)
Note: *Default Settings
Operation
Normal Indication
1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Code 70.
LED (2) turns on.
2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select LED mode of operation.
LED Mode
0 = Command mode of operation*
1 = PC mode of operation
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
optional 3-position keyswitch, move switch out of the AUX position.
1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Code 71.
LED (2) turns on.
2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select key click mode of operation.
Key Click Mode
0 = off
1 = on*
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
optional 3-position keyswitch, move switch out of the AUX position.
Remarks
29