Ultimate Technology 500 POS User Manual page 24

Table 2. Local Mode Programming Function Codes and Default Settings
71 Enable/Disable Key Clicks
80 Define Left Shift Key
81 Define Right Shift Key
82 Define Left Control Key
83 Define Right Control Key
84 Define Left Alternate Key
85 Define Right Alternate Key
86 Programming Mode Enter Macro
87 Lock Mode Enter Macro
90 Send System Log
91 Main Port Select
96 Set Secure Mode
97 Default Keyboard
98 Download Keyboard
On Enables or disables audible key clicks.
0 = off; 1 = on
Key 44 If auxiliary keyboard connected to the Series
See 500 Keyboard is other than a standard 101 or
illustration in 102- key keyboard, used to define where the
Appendix D AUX keyboard SHIFT keys are located. Refer
to Appendix D.
Key 57 See
Same as Function Code 80 above.
illustration in
Appendix D
Key 58 If auxiliary keyboard connected to the Series
See 500 Keyboard is other than a standard 101 or
illustration in 102-key keyboard, used to define where the
Appendix D AUX keyboard CONTROL keys are located.
Refer to Appendix D.
Key 64 Same as Function Code 82 above.
See
illustration in
Appendix D
Key 60 If auxiliary keyboard connected to the Series
See 500 Keyboard is other than a standard 101 or
illustration in 102-key keyboard, used to define where the
Appendix D AUX keyboard ALTERNATE keys are located.
Refer to Appendix D.
Key 62 Same as Function Code 84 above.
See
illustration in
Appendix D
None Reserved for future use.
None Reserved for future use.
None Used to read the Series 500 Keyboard system
log at the main port. For detailed information
about retrieving the system log data, refer to
the Maintenance Section of this manual.
Port 0 Used to select either the main keyboard port
or main
communications port.
None Used to toggle between secure or unsecure
mode.
None Used to reset Series 500 Keyboard to all
programmed default settings.
None Once a Series 500 Keyboard has been
programmed, the parameters can be copied
(cloned) from the source keyboard to other
keyboards.
reduces errors when programming more than
16
RS232 port as the
This feature saves time and
main