Ultimate Technology 500 POS User Manual page 21

Table 2. Local Mode Programming Function Codes and Default Settings
1 1 MSR Channel
Separator
1 2 MSR Channel 1,3 Suffix
1 3 MSR Channel
Separator
1 4 MSR C h a n n e l 2 P r e f i x
1 5 MSR Channel 2 Field Separator
1 6 MSR Channel 2 Suffix
1 7 MSR Bad Read Track 1,3
1 8 MSR Bad Read Track 2
1 9 MSR Sending
2 0 RS232 Port 0 Baud Rate
2 1 RS232 Port 0 Stop Bits
22 RS232 Port 0 Parity
23 RS232 Port 0 Handshaking
1,3 Field ^ (5Eh) for
format 1
= (3Dh) for
format 3
?<CR>
(3Fh,0Dh)
for both
f o r m a t 1 a n d
3
3 Account : (3Ah) for
format 3
; (3Bh) for
format 2
= (3Dh) for
format 2
?<CR>
(3Fh,0Dh)
for format 2
M1!<CR>
(4Dh,31h,21
h ,
0 D h )
M2!<CR>
(4Dh,32h,21
h ,
0 D h )
Send any
track
9 6 0 0 B a u d
Rate
2 s t o p b i t s
No parity
Both
13
U s e d t o s e n d a f i e l d s e p a r a t o r b e t w e e n
f i e l d s o f t h e m a g n e t i c c a r d c h a n n e l .
U s e d t o s e n d s u f f i x e s
m a g n e t i c c a r d c h a n n e l s .
U s e d t o s e n d a n a c c o u n t s e p a r a t o r o n
t h e m a g n e t i c c a r d c h a n n e l .
Used to send a
m a g n e t i c c a r d c h a n n e l .
U s e d t o s e n d a f i e l d s e p a r a t o r b e t w e e n
f i e l d s o f t h e m a g n e t i c c a r d c h a n n e l .
Used to send a
m a g n e t i c c a r d c h a n n e l .
U s e d t o s e n d a k e y s e q u e n c e t o t h e
h o s t c o m p u t e r u p o n a b a d m a g n e t i c
c a r d r e a d .
U s e d t o s e n d a k e y s e q u e n c e t o t h e
h o s t c o m p u t e r u p o n a b a d m a g n e t i c
c a r d r e a d .
U s e d t o s e n d M S R d a t a i f o n e o r b o t h
t r a c k s a r e g o o d .
0 = send any track; 1 = send if both
t r a c k s a r e g o o d .
Used to select a baud rate for Port 0.
Baud rates available are: 300, 600,
1 2 0 0 , 2 4 0 0 , 4 8 0 0 , 9 6 0 0 , 1 9 2 0 0 , 3 8 4 0 0
a n d 5 7 6 0 0 .
U s e d t o s e l e c t n u m b e r o f s t o p b i t s , 1
or 2, used with Port 0.
Used to select parity used with Port 0.
Selections available are: no parity, odd
parity or even parity.
Used to select method of handshaking used
with Port 0. Selections available are: none,
CTS/RTS, XON/XOFF or both.
a f t e r t h e
prefix after the
suffix after the