Maintenance; Technical Data; Protecting The Environment - Stanley FATMAX FME720 Original Instructions Manual

● Allow the moveable lower guard (5) to return to its original
@
position covering the blade.
Warning! Never press the spindle lock while
the blade is rotating. Be sure to hold the guard
bracket down and firmly tighten the guard bracket
@ screw after installing the blade.
Warning! The guard bracket must be returned
to its original position and the screw tightened
before activating the saw. Failure to do so may
allow the guard to contact the spinning saw
blade resulting in damage to the saw and severe
personal injury.
Accessories
The performance of your tool depends on the accessory used.
STANLEY FATMAX accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.

Maintenance

Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
@
care and regular cleaning.
Warning! Before performing any maintenance
on the tool, unplug the tool. Unplug the charger
before cleaning it.
● Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
● Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
● Safely dispose of the old plug.
● Connect the brown lead to the live terminal in the new
plug.
@
● Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the
earth terminal. Follow the fitting instructions
supplied with good quality plugs. Recommended
fuse: 13 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
(original instructions)

Technical data

Voltage
V
Power input W
No-load speed min
Blade diameter mm
Blade bore mm
Blade body thickness mm
max cross-cut capacity 90° mm
max mitre capacity 45°
mm
max depth of cut 90° mm
max depth of bevel
mm
cross-cut
Mitre (max positions) left
right
Bevel (max positions) left
right
Weight
kg
Cutting capacities
Max cross cut x depth of cut
Max bevel 47°
Max mitre 47°
Max capacity at 47° x 47° compound
L (sound pressure) 95 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 108 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Vibration emission value (a
FME720 (Type 1)
230
ac
2000
4,800
-1
255
30
1.8
305
203
92
41
47°
47°
47°
0°
22
92 mm x 305 mm
41 mm x 305 mm
92 mm x 203 mm
41 mm x 203 mm
) 2.78 m/s , uncertainty (K) 1.5 m/s
2 2
h
English
13