Connecting The Units To The Power Supply - Bosch DSA E‑Series Installation Manual

30 en | Connection
Notice!
Ethernet port 2 should be reserved for maintenance operations if your hardware contains a
second Ethernet port.
5.4

Connecting the units to the power supply

To connect the controller unit and the expansion units to the power supply:
1.
2020-05 | V2 | DOC
1
4
5
8
1 Private network
3 Local Area Network (LAN)
5 Dual controller unit
7 Controller B
9 Management port 2 (Ethernet)
Note: Reserved for maintenance
operations if the hardware contains a
second Ethernet port.
Confirm that the two power switches on the controller unit are off.
Note: If you have expansion units, confirm that their power switches are off.
2
6
7
9
2
4
6
8
Installation manual
DSA E-Series (E2800 60-bay)
3
Management station or personal
computer
Switch or hub
Controller A
Management port 1 (Ethernet)
Note: Used as default.
Bosch Security Systems B.V.