Connecting To A Polycom Endpoint Via Usb; Disconnect From A Polycom Endpoint - Polycom Pano User Manual

Related Topics
Connect to a Recent Room
Locate a System Manually
You can manually locate a Polycom endpoint using its IP address.
Procedure
1 Launch the Polycom Content App software and select Start Screen Sharing.
2 Select Find Other Rooms.
3 Enter the system IP address and select Connect.
4 Enter the password or security code, if asked.
Related Topics
Connecting to a Polycom Endpoint Using Its IP Address

Connecting to a Polycom Endpoint via USB

You can connect a Polycom Trio system or RealPresence Touch device to your computer via USB and
use the Content App to share content.
After you connect the Polycom Trio system or RealPresence Touch device to your computer, one of the
following happens:
•
If the Content App isn't running, nothing happens.
•
If the Content App is running and isn't connected to any devices, it connects to the Polycom Trio
system or RealPresence Touch device.
•
If the Content App is already connected to a device, it connects to the Polycom Trio system or
RealPresence Touch device after it disconnects from the existing device.
When you use Content App to share content, the app casts the content to the connected Polycom Trio
system or RealPresence Touch device.
Related Topics
Connecting to a Polycom Endpoint

Disconnect from a Polycom Endpoint

To connect with another Polycom endpoint, disconnect from the current one first.
Printed from Polycom, Inc. (http://documents.polycom.com) Page 27