Share Content Using An Hdmi Connection; Stop Sharing Content - Polycom Pano User Manual

Share Content Using an HDMI Connection

You can share content from a personal device that is directly connected to the Pano device using an
HDMI cable.
Remember the following when sharing your device using an HDMI connection:
•
Content from your device starts sharing with the Pano device as soon as the HDMI cable is
connected.
•
You can adjust the audio using the volume controls on the Pano device monitor or on your
device.
•
Your device video output must support the following resolutions and frame rates.
Table 1. Supported HDMI Resolutions and Frame Rates
Input
UHD
OHD
FHD
WSXGA+
UXGA
SXGA
HD
XGA
SVGA
Check your device's documentation for information on configuring HDMI resolutions and
Note
refresh rates.
Procedure
1 Connect one end of an HDMI cable to the HDMI output port on your device.
2 Connect the other end of the cable to the HDMI input port on the Pano system.
Related Topics
Sharing Content

Stop Sharing Content

When you are finished presenting content, make sure you end the sharing session.
Printed from Polycom, Inc. (http://documents.polycom.com)
Resolution
3840×2160p
2560×1440p
1920×1080p
1680×1050
1600×1200
1280×1024
1280×720
1024×768
800×600
Maximum Frame Rate(s)
30
60
60
60
60
60
60
60
60
Page 13