Selecting And Starting A Saved Program - Falcon P Series User Manual

7 • SELECTING AND STARTING A SAVED PROGRAM
7.1 • SWITCH ON
Press key 1.
7.2 • RETRIEVE
Press the programming key 4, and turn
knob 6 to select the number you want to
retrieve), shown in the display 6.
CAUTION: If the program requires using the
core probe, connect the probe to the front
panel or the display will show "Err SP"
(probe error) See "self-diagnosis and fault
identification".
7.3a •
STARTING A PROGRAM WITH
PREHEAT
If the retrieved program has
preheating, display 8 will show
[ InF ].
Press key 15 to start preheating.
A beep and the inscr iption
[ LoA ] on the display will signal
when the oven has reached the
temperature.
Place the food in the oven (if the
program includes cooking phases
with the core probe, insert the
probe in the food).
Close the door.
The display 8 shows [C 2 ] and
the oven will automatically switch
on.
OPERATIONS
7.3 • START
7.3b •
STARTING A PROGRAM WITH
PREHEAT EXCLUDED
Place the food in the oven (if the
program includes cooking phases
with the core probe, insert the
probe in the food).
As soon as the program is
retrieved (the display 8 shows
[C 1]). Start cooking phase by
pressing key 15 (LED on steady).
Turn the knob 9 to take the time
to zero.
The preheat stage has now been
skipped.
Warning: Preheating is not
necessary only when the oven is
already hot.
12
90024720rev00
Viewing the settings
If, during cooking, it is necessary to check
the settings for the current phase, press
key 4. To see the settings for successive
phases, press key 5 and turn the knob, until
the display shows the required phase.
7.3c •
S T A R T I N G
WITHOUT SAVED PREHEATING
Place the food in the oven (if the
program includes cooking phases
with the core probe, insert the
probe in the food).
As soon as the program is
retrieved (the display 8 shows
[C 1]), start the first cooking
cycle by pressing key 15 (LED
on steady).
A P R O G R A M