Raven SmarTrax Supplement Installation Manual page 7

Gvm prowler

Hide thumbs Also See for SmarTrax:

Mounting the

Universal

Bracket

OUNTING THE

Attach the universal mounting bracket on the right side of the machine using the

provided 1/2" hex head bolts. (See pictures below). Drill holes to fit the

mounting bracket pattern in the welded gusset between the right side frame rail

and the cross-member support. The picture on page 6 shows the bracket

mounted to the machine with the valve attached.

Wheel Angle Sensor and hydraulic valve are mounted on the right

side of the machine. Valve control cables are run along the frame

up into the cab through the trap door in the floor board.

Hydraulic valve and pressure switch looking in

from left side wheel well.

NIVERSAL

Manual # 016-0190-020

H A P T E R

RACKET AND

ALVE

Table of Contents