Raven SmarTrax Installation Manual page 10

Nitro N4 Series SmarTrax Installation Manual
8
Pressure Hose
1. Identify the pressure port on the steering orbital. Hoses may need to be
traced to the priority valve for proper identification. Once the port has
been identified, remove the hose from the steering orbital and install on
the appropriate tee fitting, found in the Raven adapter kit, to the steering
orbital. Once the tee fitting is installed, reattach the original hose.
2. Attach hose (P/N 214-1000-496) to the P-Port on the Raven steering
control valve, route to and attach to the open branch on the installed tee
fitting.