Install The Option Card Mounting Kit (Procedure B) - YASKAWA JOHB-GA50 Installation Manual

5 Installation Procedure
11.
Use a slotted screwdriver to lock the front cover of the
drive.
A - Front cover lock
12.
Set the drive-related parameters.
Refer to the instruction manual for each communication
option for more information.
◆

Install the Option Card Mounting Kit (Procedure B)

De-energize the drive before you start the procedure.
DANGER
disconnect wiring on an energized drive. Before servicing, disconnect all power
to the equipment and wait for the time specified on the warning label at a
minimum. The internal capacitor stays charged after the drive is de-energized.
The charge indicator LED extinguishes when the DC bus voltage decreases
below 50 Vdc. When all indicators are OFF, measure for dangerous voltages to
make sure that the drive is safe. If you do work on the drive when it is
energized, it will cause serious injury or death from electrical shock.
20 YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
Figure 5.11 Lock the Front Cover
Electrical Shock Hazard. Do not examine, connect, or