Receiving - YASKAWA JOHB-GA50 Installation Manual

Environ
ment
• 10 Hz to 20 Hz: 1 G (9.8 m/s
Vibration
• 20 Hz to 55 Hz: 0.6 G (5.9 m/s
Install the drive vertically or horizontally for sufficient airflow to cool
Installation
the drive.
Orientation
Refer to the drive Technical Manual for more information.
NOTICE
other electronics near the drive. Shield the drive from electrical interference if
components must be near the drive. Components near the drive can cause
incorrect drive operation from electrical interference.
NOTICE
shavings or wire clippings, fall into the drive during drive installation. Put a
temporary cover over the drive during installation. Remove the temporary cover
before start-up. Unwanted objects inside of the drive can cause damage to the
drive.
4

Receiving

1. Examine the products for damage.
If there is damage to the products, contact the shipping
company immediately. The Yaskawa warranty does not
include damage from shipping.
2. Verify the product model number to make sure that you
received the correct model.
If you have problems with the products, contact the distributor
where you purchased the products or the Yaskawa sales office
immediately.
YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
Contact Yaskawa or your nearest sales representative when not
grounding the neutral point.
Do not put drive peripheral devices, transformers, or
Do not let unwanted objects, for example metal
Conditions
2 , 32.15 ft/s 2 )
2 2
, 19.36 ft/s )
4 Receiving
9