Inkbird ITC-306A Manual page 5

seconds to display the corresponding LED symbol and state, because
of the WIFI module data processing.
Add device in quick connection:
Plug the device in the socket and make sure that the device is in the
Smartconfig.
Configuration state (the LED symbol is flashing, interval flashing 250ms).
Click "Confirm indicator rapidly blink" and then select Wi-Fi network, enter
Wi-Fi password, click "confirm" to enter connection process.
The device only supports 2.4GHz Wi-Fi router.
Add device in AP mode:
Plug the device in the socket and make sure that the device is in the AP
Configuration State (the LED symbol is flashing slowly, interval flashing
1500ms).
Click "Confirm indicator slowly blink" and then select Wi-Fi network, enter
Wi-Fi password, click "confirm" to enter connection process.
Press "Connect now" and it will go to your WLAN Setting in your smart
phone, select the "SmartLife-XXXX" to directly connect to the router without
putting in password.
Go back to app to enter into the automatic connection interface.