Advertisement
Advertisement
Table of Contents
Related Manuals for Inkbird ITC-306A
Summary of Contents for Inkbird ITC-306A
- Page 1 ITC-306A Smart Wi-Fi Temperature Controller for Aquarium...
-
Page 2: Product Features
CAUTION KEEP CHILDREN AWAY TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS RISK OF ELECTRIC SHOCK. DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAPS OR AN EXTENSION CORD USE ONLY IN DRY LOCATION Product Features Plug and play, easy to use Dual relay controlling, one for control output, another for abnormal protection Support Celsius and Fahrenheit reading... -
Page 3: Control Panel
Range of Range of Celsius Error Fahrenheit Error Temperature(T) Temperature(T) Celsius Fahrenheit -40℃≤T<10℃ ±2℃ -40℉≤T<50℉ ±3℉ 10℃≤T<80℃ ±1℃ 50℉≤T<176℉ ±2℉ 80℃≤T≤100℃ ±2℃ 176℉≤T≤212℉ ±3℉ Display unit: Celsius℃orFahrenheit℉ Ambient temperature:-20℃~40℃/-4.0℉~104℉ Storageenvironment: Temperature: 0℃~60℃/32℉~140℉; Humidity:20~80%RH (Unfrozen or condensation state) Warranty: Controller 2 years, probe 1 year Control Panel Output socket Output socket... -
Page 4: Download The App
Inkbird Smart APP Setting 5.1 Download the APP Search the keyword “InkbirdSmart” in Appstore or Google Play, or scan the following QR code to download and install the APP . 5.2 Pair with your phone ① Open the app, it will ask you to register or log in your account on the APP . - Page 5 seconds to display the corresponding LED symbol and state, because of the WIFI module data processing. Add device in quick connection: Plug the device in the socket and make sure that the device is in the Smartconfig. Configuration state (the LED symbol is flashing, interval flashing 250ms). Click “Confirm indicator rapidly blink”...
- Page 6 ④Click “Done” after adding device succeedfully and enter into device controlling interface . ⑤In the temperature control mode, user can set control function via APP . Device Name Device Information Back to Home Page Current Temperature Heating State Temperature Trend gragh Temperature Setting Value2 Temperature...
-
Page 7: Power Button
Back to Front Page Temperature Unit Switch Temperature Calibration High Temperature Value Low Temperature Value Continuous Heating Time Controlling Function Description 6.1 Button Description 6.1.1 Restore to Factory Settings Press and hold the decrease button to power on, the buzzer will beep POWER once, that all parameters will restore to the factory settings. - Page 8 the setting state, it will exit and save the setting state, then return to the normal working mode. 6.2 Menu Setting Flow Chart Press “SET” Key for over 2 seconds to enter parameters setting mode 77.0℉ Temperature Set Value1 78.0℉ Temperature Set Value2 212℉...
-
Page 9: Changing Settings
6.3 Changing Settings Default Code Symbol Setting Range Menu Function Settings Remarks 20.0℃~35.0℃ 25.0℃ Temperature Setting 1 68.0℉~95.0℉ 77.0℉ 20.0℃~35.0℃ 26.0℃ Temperature Setting 2 68.0℉~95.0℉ 78.0℉ 0.0℃~100℃ 100℃ High Temperature Alarm 32.0℉~212℉ 212℉ 0.0℃~100℃ 0.0℃ Low Temperature Alarm 32.0℉~212℉ 32.0℉ Continuous Heating 1~72 Hour 6 Hours... -
Page 10: Abnormal Situation
control is turned on. If the continuous heating time arrives, but the measured temperature has not risen to the stop heating temperature, at this time the heater is abnormal or the probe is abnormal, and the output is forcibly turned off. -
Page 11: Technical Assistance And Warranty
(not transferable), against defects caused by INKBIRD’ s workmanship or materials. This warranty is limited to the repair or replacement, at INKBIRD’ s discretion, of all or part of the controller. The...