Page 1
Disclaimer Inkbird has made every effort to ensure that the information contained in this document is accurate and complete; however, the contents of this document are subject to revision without notice. Please contact Inkbird to ensure you have the latest version of this document.
ITC-106 User Manual 1. Safety Precautions Ensure the product using within the specification. Do not touch the terminals at least while power is being supplied. Doing so may occasionally result in injury due to electric shock. Do not allow pieces of metal, wire clippings, or fine metallic shaving or filings from ...
ITC-106 User Manual 2. Specification AC 100~240V 50/60Hz (model:ITC-106RH, ITC-106VH) Supply Voltage AC/DC 12~24V 50/60Hz (model:ITC-106RL, ITC-106VL) DC 12~24V (model:ITC-106RL, ITC-106VL) Operating Voltage 85~110% of the rated voltage Range 5VA(100~240VAC) 4VA(12~24VAC) Power Consumption 3W(12~24VDC) PV: displays in red high luminance LED with 9.9mm height of 4...
ITC-106 User Manual 3. Dimension and Installing Size Diagram (Unit: mm) Shell Size Install Adapter Panel Cutout Insert the temperature controller into the hole in the panel, put the adapter from the back and push it to button and make it clasp for temporarily fastening. Be sure there is no gap among the controller, panel and the adapter and then fasten the two screws on the adapter with the torque of 0.29N to 0.39N.
ITC-106 User Manual 5. Panel Instruction ① PV Displaying Screen: Displaying the measuring value or the setting parameters. ② SV Displaying Screen: Displaying the setting value or the set parameters readout. ③ Working Indicator Light OUT: Control Output Indicating ALM: Alarm Output Indicating RUN: Manual Operation Indicating ④...
ITC-106 User Manual 6. Setting Parameters 6.1 Sensor Type and Measuring Range Sensor Type Input Code Measuring Range Pt100 -200~600 (º C) -300~1100(º F) Platinum Cu50 -50~150 (º C) -100~300(º F) Resistor -50~1300 (º C) -100~2300(º F) -50~1700 (º C) -100~3000(º...
ITC-106 User Manual 6.23 Sensor Input Type Setting: Set the sensor input type as required(the faulty is the "K" type), the temperature need to calibrated for there will be deviation due to the sensor and the operating environment. 6.24 Output Parameters Setting:...
Page 9
ITC-106 User Manual Inkbird Tech. Co., Ltd. www.ink-bird.com...
7.2 Warranty INKBIRD TECH. C.L. warrants this thermostat for one years from the date of purchase when operated under normal condition by the original purchaser (not transferable), against defects caused by INKBIRD’s workmanship or materials. This warranty is limited to the repair or replacement, at INKBIRD’s discretion, of all or part of the thermostat.
Need help?
Do you have a question about the ITC-106 and is the answer not in the manual?
Questions and answers