Removing The Rear Panel - JVC TH-A10 Service Manual

Removing the right and left corner
covers (See Fig.10 and 11)
Prior to performing the following procedure, remove
the top cover, the rear cover, the side covers and the
front panel assembly.
It is not necessary to remove the front panel
assembly.
1. Move the left corner cover backward to release the
three joint hooks d.
2. Remove the right corner cover in the same way.

Removing the rear panel

Prior to performing the following procedure, remove
the top cover and the rear cover.
1. Remove the eighteen screws E and the one screw F
attaching the rear panel.
2. Release the two joints e on both sides of the body.
Joint e
Rear panel
Fig.12
(See Fig.12 to 14)
Left corner cover
Joint d
Fig.10
Joints d
Right corner cover
Fig.11
E
E
E
E
F
Fig.12
Fig.12
TH-A10
Joints d
Joint d
Rear panel
E
E
E
Joint e
Rear panel
1-7