Front Panel Assembly Fig - JVC TH-S11 Service Manual

3.1.2 Removing the front panel assembly
(See Figs.5 to 7)
• Remove the metal cover.
(1) From the right side of the DVD mechanism assembly, push
the slide cam and pull the tray assembly out of the main
body in the direction of the arrow. (See Fig.5.)
(2) From the front side of the main body, remove the CD fitting
assembly from the tray assembly in the direction of the ar-
row and push in the tray assembly as before. (See Fig.6.)
(3) From the top side of the main body, disconnect the card
wire from the connector
Fig.5.)
(4) Disconnect the card wire from the connector
HP terminal board. (See Fig.5.)
(5) From the bottom side of the main body, remove the three
screws C attaching the front panel assembly. (See Fig.7.)
(6) From both sides and back side of the main body, remove
the front panel assembly in the direction of the arrow while
releasing the joints b. (See Fig.7.)
CN400 on the main board. (See
CN510 on the
DVD mechanism assembly
Main board
DVD mechanism
Tray assembly
assembly
Slide cam
Fig.5
Front panel assembly
CD fitting assembly
Fig.6
b
Front panel assembly
Fig.7
HP terminal board
CN400
CN510
Front panel assembly
C
b
(No.MB413)1-9