JVC TH-A10 Service Manual page 13

<Removing DVD mechanism unit>
Removing the clamper base (refer to Figure 1)
o Remove the top cover.
o Remove the DVD mechanism unit.
1. Remove the two screws at A fixing the clamper base.
Removing the loading tray (refer to Figures 2 - 4)
o Remove the clamper base.
1. Turn the up-down cam lever clockwise (in the direction
of the arrow in Figure 2) to lower the position of the mechanism.
2. Manually set the loading tray to the fully-open position.
3. Stretch the tray stoppers on both sides of the loading
base outward and pull out the tray.
Tray stopper
Loading tray
Tray stopper
Figure 4
Clamper base
Loading base
Up-down cam
Loading base
Loading tray
Figure 1
Loading tray (front side)
Figure 2
Loading tray
Figure 3
TH-A10
Lever
Push
Push
1-13