Technical Specifications; Ac Power Module (Rpa1101-Si-220S12); Introduction; Panel And Slots - Raisecom ISCOM5504-GP Hardware Description

Raisecom
ISCOM5504-GP (A) Hardware Description
LINK
1/2/3/4

2.2.5 Technical specifications

Table 2-8 lists technical specifications of the GPSC card.

Table 2-8 Technical specifications of the GPSC card

Dimensions
Weight
Power consumption < 34.5 W

2.3 AC power module (RPA1101-SI-220S12)

2.3.1 Introduction

The RPA1101-SI-220S12 (hereinafter referred to as RPA1101) module is the AC power
module of the ISCOM5504-GP. It supports the following features:










2.3.2 Panel and slots

The RPA1101 power module can be only inserted into slot 4 or slot 5.
Figure 2-6 shows the panel of the RPA1101 power module.
LED Status
Green
Parameter
259.3 mm (Width) × 243.4 mm (Depth) × 19.8 mm (Height)
0.64 kg
Wide voltage input: 100–240 VAC
Rated output voltage: 12 V; rated output current: 8.3 A
Output overvoltage and overcurrent protection
Input surge current and voltage suppression
Power status LED
Operating temperature: -10 to +70° C
Turn off the power switch or disconnect the power connection before installing or
removing the power cable.
Ensure that the label on the power cable is correct before connecting the power
cable.
Use the power cable compliant with required specifications.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
PON interface working LED
 Green: the PON interface is connected properly and there
is a registered ONU working on the interface.
 Off: the PON interface is disconnected or there is no
registered ONU working on the interface.
Description
Description
2 Components
10